Insulating, Connecting
Insulating Tape PVC 15 mm, 10 m, 10 Rolls
The self-adhesive PVC electrical insulating tape has good properties. Product Information: - Width: 15 mm - Length per roll: 10 m - Standard: VDE, 60454-3-1-5/F-PVCP/90 - Color: Blue - Weight: 0.280 kg
Ring Insulators with wood thread, 25 Pieces
The ring insulators with sturdy wooden thread are ideally suited for permanent installation of wires and cables (e.g. in tunnel construction site, etc.). Features: - 2 x easier to screw in than standard insulators - the wood is not "displaced" but "cut - No need to pre-drill hard wood - Significantly less cracking in the wood when screwing in - Best insulation properties Product Information: - Material: impact-resistant plastic - Screw: solid solid 6 mm post and self-tapping thread - Weight per unit: 0.500 kg
Connection Clamp
This pole terminal is used to connect a connection cable to the cable drums 002020, 002021 and 002022. Product Information: - Screw thread M6 - Socket 4 mm in diameter - Weight: 0.011 kg
Cable Lug, Insulated
The high-quality cable lug with screw terminal, shock-resistant, flexible insulating sleeve with cross hole is suitable for a screw connection up to max. 2.5 mm². The contacts are made of brass, nickel-plated and the insulation made of solid plastic. Product Information: - Material: nickel-plated brass, plastic - Fork diameter: 4-7 mm - Weight: 0.006 kg
Detonator Couples 0,5-1,5 mm², 10 Pieces
Solderless and insulated connection of wires. For fast, secure and durable connection of the detonator cables. Type: End-to-End Connecting Tube 0,5-1,5 mm² The detonator couples Best suited for solderless and insulated connection of blasting wires and wires. They enable a fast, safe and permanent connection and repair of ignition cables. Product Information: - Dimensions: 0.5-1.5 mm² - Weight per unit: 0.012 kg
Cable Lugs U-Type M6 0.75-1.50 mm², 10 Pieces
The cable lugs are ideal for solderless and insulated connection of blasting cables and wires. They enable a fast, safe and permanent connection and repair of ignition cables. The cable lugs can be used for connecting the ignition cable to pole terminals, ohmmeters and ignition machines. Product Information: - Dimension: M6 0.75-1.50 mm² - Weight per unit: 0.012 kg
Special Crimper
For safely crimping of solderless cable connectors and cable lugs. It crimps evenly. The pliers enable a secure squeezing of solderless cable connectors and cable lugs. Product Information: - Weight: 0.520 kg
Scotchlok Magazine Pliers
These pliers are fitting for 10-magazine with scotchlok UR2-M- connectors (002240). The handling is very simple - just put the magazine in the pliers. No more picking up every single scotchlok-connector! They are perfect for faster working process. Product Information: - Material: metal - Weight: 0.950 kg
Connection Clip Multi Clip, 100 Pieces
The plastic clamp "Multi Clip" is used to produce cross connections of detonating cords. It is suitable for detonating cords 6 g / m or 12 g / m. Product Information: - Material: Plastic - Weight per unit: 0.480 kg
Insulating Tape PVC 30 mm, 25 m, 5 Rolls
The PVC insulating tape is very strong so that especially electricians like to use this tape. Due to its width of 30 mm an insulation is quickly done. Product Information: - Width: 30 mm - Length per roll: 25 m - Standards: VDE, DIN EN 60454-3-1 F-PVC/105/A-T× Typ 10 - Colour: blue - Weight per unit: 0.740 kg
Connecting Fuse for Riocord, Nitrocord 100 g/m, 100 Pieces
It connects an electrical detonator safety and reliable with the blasting cord. The electrical detonator will always be tight and direct connected with the detonator cord. Errors caused by an unsafe fastening can be deducted. Pull the connecting fuse over the detonation cord and put it up to half into the stemming. Than plug the electronic detonator right next to the detonation cord in the connecting fuse. Advantages: The detonator always remains closely next to the blasting cord in its whole length. The connecting spot won’t fall over so the blasting cord won’t bend due to pushing the fuse in the stemming. The connection can be controlled. No need for wrapping with insulant tape or soft wire which costs time. You can protect the connection spot against falling stones or any other mechanical damages if you put the fuse in the mouth of the bore hole. Product Information: - Material: Plastic - Color: white - Dimensions: about 9 cm long - Weight per unit: 0.550 kg Note: There may be manufacturing tolerances of +/- 1 mm for the dimensions.
Connecting Fuse for Riocord, Nitrocord 100 g/m, 100 Pieces
It connects an electrical detonator safety and reliable with the blasting cord. The electrical detonator will always be tight and direct connected with the detonator cord. Errors caused by an unsafe fastening can be deducted. Pull the connecting fuse over the detonation cord and put it up to half into the stemming. Than plug the electronic detonator right next to the detonation cord in the connecting fuse. Advantages: The detonator always remains closely next to the blasting cord in its whole length. The connecting spot won’t fall over so the blasting cord won’t bend due to pushing the fuse in the stemming. The connection can be controlled. No need for wrapping with insulant tape or soft wire which costs time. You can protect the connection spot against falling stones or any other mechanical damages if you put the fuse in the mouth of the bore hole. Product information: - Material: Plastic - Colour: white - Dimensions: about 9 cm long - Weight per unit: 0.750 kg Note: There may be manufacturing tolerances of +/- 1 mm for the dimensions.
Connector
Connection clamp for attaching connection wire to the cable drums. With the conector you can quickly and safely connect your cables to the pole terminals of the cable drums and the ignition circuit tester. The 360 degree spring ensures a secure connection. Product Information: - Type of connection: Screwable - Diameter: 4 mm - Weight: 7 g
Detonator Couples with Shrink Insulation 0,5-1,5 mm², 10 Pieces
With these connectors, ignition cables and wires can be connected without soldering. They enable quick, safe and permanent connection. The shrink insulation protects against the ingress of moisture. Product Information: - Dimension: 0.5-1.5 mm² - with shrink insulation - Shrink temperature: approx. 120 ° C - Weight per Unit: 0.012 kg
WAGO Connecting Clamp 221-2411, 60 Pieces
Wire connection for all wire types from 0.2 to 4 mm² - easy, quick and safe. Thanks to lever technology, the ladder can be connected completely without tools. Just open the levler, put the conductor in, close the lever. The connection is visible through the transparent plastic and can be easily checked. Product information: - Rated Current: 32 A - Rated Voltage: 450 V - Length: 3.55 cm - Width: 0,81 cm - Color: Transparent, Orange - Special Features: Operating Lever, Test Port - Number of Poles: 1 - Temperature Range: + 85 °C - Cable Cross Section: 0,2-4,0 mm² - Insulation Material: Plastic - Stripping Length: 11 mm - Weight per Unit: 0.012 kg
Screwdriver for Ring Insulators
With the screwdriver, the ring insulators (002170) can be screwed in effortlessly with a cordless screwdriver. Product Information: - Material: impact-resistant plastic - Weight per unit: 0.020 kg
Knipex 97 50 01 Scotchlok pliers
The Knipex crimping pliers 975001 are used for crimping plastic-insulated telecommunication or signal cable cores according to the U-contact principle in Scotchlok single connectors. No stripping is required, as the U-elements take over the contacting process. They feature additionally induction-hardened cutting edges and an opening spring. The head is polished, and the handles are coated with plastic. The crimping pliers are made of vanadium steel, oil-hardened and tempered. Product Information: - Material: Metal; handles made of plastic - For Scotchlok single connectors - With opening spring - With cutting edges - Weight: 0.135 kg - Dimensions: 155 × 70 × 15 mm
Cable Lugs O-Type, 10 Pieces
The cable lugs are ideal for solderless and insulated connection of blasting cables and wires. They enable a fast, safe and permanent connection and repair of ignition cables. The cable lugs can be used for connecting the ignition cable to pole terminals, ohmmeters and ignition machines. Product Information (002033-1): - Dimension: M4 0.50-1.50 mm² - Weight per unit: 0.009 kg Product Information (002033-2): - Dimension: M6 0.50-1.50 mm² - Weight per unit: 0.009 kg
Cable Lugs O-Type M4 0.50-1.50 mm², 10 Pieces
The cable lugs are ideal for solderless and insulated connection of blasting cables and wires. They enable a fast, safe and permanent connection and repair of ignition cables. The cable lugs can be used for connecting the ignition cable to pole terminals, ohmmeters and ignition machines. Product Information: - Dimension: M4 0.50-1.50 mm² - Weight per unit: 0.009 kg
Insulating Caps 3 mm, 50 Pieces
The perfect tool for insulating igniter and ignition cable connections. The sleeve length is 70 mm. The insulating sleeves are available in different versions. Product Information: - Dimension: 3 mm Ø, 70 mm long
Insulating Caps 3 mm
The perfect tool for insulating igniter and ignition cable connections. The sleeve length is 70 mm. The insulating sleeves are available in different versions. Product Information: - Dimension: 3 mm Ø, 70 mm long
Insulating Caps 3 mm
The perfect tool for insulating igniter and ignition cable connections. The sleeve length is 70 mm. The insulating sleeves are available in different versions. Product Information: - Dimension: 3 mm Ø, 70 mm long
Insulating Caps 3 mm
The perfect tool for insulating igniter and ignition cable connections. The sleeve length is 70 mm. The insulating sleeves are available in different versions. Product Information: - Dimension: 3 mm Ø, 70 mm long
Insulating Caps 5 mm, 50 Pieces
The perfect tool for insulating igniter and ignition cable connections. The sleeve length is 70 mm. The insulating sleeves are available in different versions. Product Information: - Dimensions: 5 mm Ø, 70 mm long