Sign Mounting
Holder for Labels 10 x 10 cm
The stainless steel insert holder is suitable for danger labels 10x10cm. A retaining bar prevents the danger labels from falling out. Product Information: - Material: stainless steel - Dimensions: 10 x 10 cm - Weight: 0.100 kg
Holder for Labels 30 x 30 cm
The holder made of steel is suitable for labels with the size 30 x 30 cm. A retaining spring prevents the label from falling out. Product Information: - Material: galvanized steel - Dimensions: 30 x 30 cm - Weight: 0.840 kg
Holder for Labels 29 x 29 cm
The insert holder made of coated sheet steel is suitable for danger labels with the size 29 x 29 cm. A retaining bar prevents the danger labels from falling out. Product Information: - Material: coated steel sheet - Dimensions: 29 x 29 cm - Weight: 0.720 kg
Ground socket for tubular posts
The ground socket is suitable for tubular posts with a diameter of 60 mm. Thanks to the ground socket, the tubular post can be removed quickly. As a result, this type of fastening is particularly suitable in areas where frequently damaged pipe posts have to be replaced and in areas where the post has to be removed for a short time. Product Information: - Material: Galvanized Gray Cast Iron - For Tubular Post: 60 mm Diameter - Length: 350 mm - Including Clamping Nut and PE Clamping Ring - Weight: 4.800 kg
Fence Fixture for Signs, Set of 2
For fastening signs to a double bar fence, lattice fence or construction fence. Set consisting of 2 corner lug sets, 2 carriage bolts M 8x25 made of V2A and 2 hexagon nuts M8 made of V2A. Product Information: - Material: Hot-Galvanized Steel - Dimensions: 40 x 75 mm - Weight: 0,100 kg
Plastic Clamp, White
With the clamp, signs can be attached to a square tube as well as to a shaft tube. Two eyelets on the side can be used to hang barriers. Note: Two clamps are required to mount a sign. Product Information: - Material: Plastic - Color: White - Suitable for Square Tubes 40 x 40 mm and Round Tubes Ø 42 mm - Weight: 0.050 kg
Adhesive Pads, Set of 4
Adhesive pads for attaching signs to even, grease-free and clean surfaces. Allows attachment without drilling. Product Information: - Material: PE Foam - Diameter: 30 mm - Double-Sided, Strongly Adhesive - Suitable for Indoor and Outdoor Use - Set of 4 Pieces
Mounting set for Signs 50 x 80 cm
Signage with a dimension of 50 x 80 cm is particularly easy to mount with this set. The signs are attached to the tubular post using the pipe clamp and reinforcement plate. Depending on the subsurface, we recommend using the supplied ground anchor or using a ground socket. Including plastic end cap and ground anchor. Set consisting of: - Tubular Post (Length 2.5 m) - Pipe Clamp (Hole Spacing 50 cm, Length 54 cm) - Reinforcement Plate (Dimension 50 x 80 cm, Thickness 2 mm) Product information: - Material: hot-galvanized steel - Diameter Tubular Post: 60 mm - Wall thickness Tubular Post: 2 mm - Length Tubular Post : 2.5 m - Weight: 8.810 kg
Vierkantrohr verzinkt, 40 x 40 mm Länge: 3,0 m
Zusammen mit einer Fußplatte und Klemmschellen lassen sich mit dem Vierkantrohr Schilder und Kennzeichnung variabel einsetzen. Das Vierkantrohr ist gemäß TL-Aufstellvorrichtung geprüft. Produktinformationen (007850-1): - Material: Stahl verzinkt - SeitenlängeN: 40 x 40 mm - Länge: 1,5 m - Gewicht: 5,000 kg Produktinformationen (007850-2): - Material: Stahl verzinkt - SeitenlängeN: 40 x 40 mm - Länge: 2,0 m - Gewicht: 6,700 kg Produktinformationen (007850-3): - Material: Stahl verzinkt - SeitenlängeN: 40 x 40 mm - Länge: 2,5 m - Gewicht: 8,300 kg Produktinformationen (007850-4): - Material: Stahl verzinkt - SeitenlängeN: 40 x 40 mm - Länge: 3,0 m - Gewicht: 10,000 kg
Cable Ties Fischer, Various Sizes, Black, 100 Pieces
Firm cable ties of the Fischer brand for bundling cables and wires. Product Information (003990-1): - Width: 2.5 mm - Length: 100 mm - Special Features: UV Stabilized - Color: Black - Weight: 0,030 kg Product Information (003990-2): - Width: 3.6 mm - Length: 200 mm - Special Features: UV-Stabilized - Color: Black - Weight: 0,100 kg Product Information (003990-3): - Width: 4.8 mm - Length: 350 mm - Special Features: UV-Stabilized - Color: Black - Weight: 0,250 kg Product Information (003990-4): - Width: 7.6 mm - Length: 450 mm - Special Features: UV-Stabilized - Color: Black - Weight: 0,500 kg
Adhesive pocket for hazard labels
The adhesive bags have a self-adhesive backside and can be glued to transport containers. Thanks to the high-quality ziper, the hazard labels and UN numbers can be easily exchanged and are protected from water. Product information (007208-1): - Dimensions: 10 x 10 cm - suitable for labels - self-adhesive backside - clear plastic - high quality ziper - Weight: 0.050 kg Product information (007208-2): - Dimensions: 15 x 5 cm - suitable for UN numbers - self-adhesive backside - clear plastic - high quality ziper - Weight: 0.050 kg
Adhesive pocket for hazard labels
The adhesive bags have a self-adhesive backside and can be glued to transport containers. Thanks to the high-quality ziper, the hazard labels and UN numbers can be easily exchanged and are protected from water. Product information (007208-1): - Dimensions: 10 x 10 cm - suitable for labels - self-adhesive backside - clear plastic - high quality ziper - Weight: 0.050 kg Product information (007208-2): - Dimensions: 15 x 5 cm - suitable for UN numbers - self-adhesive backside - clear plastic - high quality ziper - Weight: 0.050 kg
Tubular Post, Hot-Galvanized Steel, Diameter 60 mm
Signage is particularly easy to mount with a tubular post. The signs are attached to the tubular post using various support systems (pipe clamp, reinforcement plate). Depending on the subsurface, we recommend using the supplied ground anchor or using a ground socket. Including plastic end cap and ground anchor. When choosing the correct length of the tubular post, the height of the sign, the desired distance from the lower edge of the sign to the ground and the depth of the post into the soil (500 - 750mm) must be taken into account. Shield height + ground clearance + recess depth = tubular post length Product information (007810-1): - Material: hot-galvanized steel - Diameter 60 mm - Wall thickness: 2 mm - Length: 2.0 m - Weight: 4.7 kg Product information (007810-2): - Material: hot-galvanized steel - Diameter 60 mm - Wall thickness: 2 mm - Length: 2.5 m - Weight: 5.9 kg Product information (007810-1): - Material: hot-galvanized steel - Diameter 60 mm - Wall thickness: 2 mm - Length: 3.0 m - Weight: 7.0 kg
Galvanized Pipe Support for Signs 80 x 50 cm
A sturdy mounting option for combination warning signs 7030 and 7080 is provided by the galvanized pipe support. With concrete it in the ground to get the ideal place to set up your signs reliably. Product Information: - Material: Fire-sealed Steel - Dimensions: 250 x 80 x 50 cm - Weight: 12.000 kg
Pipe Clamps, Diameter 60 mm
Pipe clamps for attaching signs to a round post with a diameter of 60 mm. The distance between the holes is to be selected to match the size of the sign. Product Information (007830-1): - Material: Fire-sealed Galvanized Steel - Including Bolts and Nuts - Hole Spacing: 7.0 cm - Length: 11.0 - Weight: 0,360 kg Product Information (007830-1): - Material: Fire-sealed Galvanized Steel - Including Bolts and Nuts - Hole Spacing: 35.0 cm - Length: 39.0 - Weight: 0,495 kg Product Information (007830-1): - Material: Fire-sealed Galvanized Steel - Including Bolts and Nuts - Hole Spacing: 50.0 cm - Length: 54.0 - Weight: 0,710 kg Note: We also recommend a reinforcement plate (007835-) for attaching signs to a round post.
Reinforcement Plate 2 mm for Signs
For mounting on a tubular post, the thickness of a sign should be at least 2 mm. Aluminum signs usually have a maximum thickness of 1 mm. Therefore we recommend using a reinforcement plate when attaching signs. The sign can be glued or riveted to the reinforcement plate. Product Information (007835-1): - Material: Aluminum - Thickness: 2.0 mm - Corners rounded - Dimensions: 20 x 30 cm - Weight: 0.330 kg Product Information (007835-2): - Material: Aluminum - Thickness: 2.0 mm - Corners rounded - Dimensions: 25 x 35 cm - Weight: 0.480 kg Product Information (007835-3): - Material: Aluminum - Thickness: 2.0 mm - Corners rounded - Dimensions: 30 x 40 cm - Weight: 0.660 kg Product Information (007835-4): - Material: Aluminum - Thickness: 2.0 mm - Corners rounded - Dimensions: 35 x 50 cm - Weight: 0.960 kg Product Information (007835-5): - Material: Aluminum - Thickness: 2.0 mm - Corners rounded - Dimensions: 40 x 60 cm - Weight: 1.320 kg Product Information (007835-6): - Material: Aluminum - Thickness: 2.0 mm - Corners pointed - Dimensions: 50 x 80 cm - Weight: 2.200 kg
Galvanized Pipe Support for Signs 80 x 50 cm
A sturdy mounting option for combination warning signs 7030 and 7080 is provided by the galvanized pipe support. With concrete it in the ground to get the ideal place to set up your signs reliably. Product Information: - Material: Fire-sealed Steel - Dimensions: 250 x 80 x 50 cm - Weight: 12.000 kg
Galvanized Pipe Support for Signs 80 x 50 cm
A sturdy mounting option for combination warning signs 7030 and 7080 is provided by the galvanized pipe support. With concrete it in the ground to get the ideal place to set up your signs reliably. Product Information: - Material: Fire-sealed Steel - Dimensions: 250 x 80 x 50 cm - Weight: 12.000 kg
Galvanized Pipe Support for Signs 80 x 50 cm
A sturdy mounting option for combination warning signs 7030 and 7080 is provided by the galvanized pipe support. With concrete it in the ground to get the ideal place to set up your signs reliably. Product Information: - Material: Fire-sealed Steel - Dimensions: 250 x 80 x 50 cm - Weight: 12.000 kg