Wires, Cables
Extension Wires VK green (Copper)
The insulation of the steel wire is durable and flexible. The wire is tested and approved by the Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: copper - Diameter of the strand: 0.6 mm - Outer diameter: 1.5 mm - Insulation: polypropylene (PP) - Color: Green - Resistance of the single conductor per 100 m: 6.5 ohms
Extension Wire ST VVS duplex (Steel), Different Versions
The extension wire has a durable and flexible insulation and is tested by the Federal Institute for Materials Research and Testing (BAM). According to the requirements of ignition systems, our extension wires meet very high standards due to the blasting technique and have an approval from the German Federal Institute for Materials Research and Testing (BAM). The duplex wire allows twice the number of strands to be laid at once. Product Information: - Approval: BAM - Material: Steel - Type of connection: duplex - Diameter of the strand: 0.6 mm - Number of Strands: 2 - outer diameter: 1.3 mm - Insulation: Polyvinyl chloride (PVC) - Color: Grey - Resistance of the single conductor per 100 m: 40 ohms
Extension Wire VS Grey (Steel)
The insulation of the steel wire is durable and flexible. The wire is tested and approved by the Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: steel - Diameter of the strand: 0.6 mm - Outer Diameter: 1.3 mm - Insulation: Polyvinyl chloride (PVC) - Color: grey - Resistance of the single conductor per 100 m: 40 ohms
Connecting Fuse for Detonating Cord 20 g/m
It connects an electrical detonator safety and reliable with the blasting cord. The electrical detonator will always be tight and direct connected with the detonator cord. Errors caused by an unsafe fastening can be deducted. Pull the connecting fuse over the detonation cord and put it up to half into the stemming. Than plug the electronic detonator right next to the detonation cord in the connecting fuse. Advantages: The detonator always remains closely next to the blasting cord in its whole length. The connecting spot won’t fall over so the blasting cord won’t bend due to pushing the fuse in the stemming. The connection can be controlled. No need for wrapping with insulant tape or soft wire which costs time. You can protect the connection spot against falling stones or any other mechanical damages if you put the fuse in the mouth of the bore hole. Product information suitable for Riocord (002051): - Material: Plastic - Colour: red - Dimensions: about 8.5 cm long - Weight per unit: 0.620 kg Product information suitable for Nitrocord (002251): - Material: Plastic - Colour: blue - Dimensions: about 8.5 cm long - Weight per unit: 0.740 kg
Connection Wire
A 1 m long blasting wire with cable lugs used to connect the cable drums 002020, 002021 and 002022 to the igniter. Product information 4 DDS / K Steel (002025): - Material: steel, copper - Dimension: 1 m length - Outer diameter: 2.5 mm - Dimension: M6 - Number of wires steel: 3 - Number of wires copper: 1 - Type of connection: stranded - Insulation: PVC - Color: red - Resistance of the single conductor per 100 m: 5 ohms - Weight: 0.039 kg Product information 4DDK Copper (002125) - Material: copper - Dimension: 1 m length - Outer diameter: 2.5 mm - Dimension: M6 - Number of wires copper: 4 - Type of connection: stranded - Insulation: PVC - Color: yellow - Resistance of the single conductor per 100 m: 1.8 ohms - Weight: 0.038 kg Product information 4 DK copper special (002126): - Material: copper - Dimension: 1 m length - Outer diameter: 5.0 mm - Number of wires copper: 4 - kind: easy - Insulation: PVC - Color: yellow - Resistance of the single conductor per 100 m: 1.8 ohms - Contents: 2 pieces per 1 m - Weight: 0.091 kg
Blasting Wire 4 DDK Yellow (Copper) - Twisted, Roll 100 m
According to the requirements of ignition systems, our blasting wires meet very high standards due to the blasting technique and have an approval from the German Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: copper - Length: 100 m - Outer diameter: 2.5 mm - Number of wires copper: 4 - Insulation: PVC - Minimum operating temperature: - 5 °C - Insulation: PVC - Color yellow - Resistance of the single conductor per 100 m: 1.4 ohms
Box for Wire Rings
With this plastic box, 100 m wire rings such the article 002010 can be easily unwind. The box can be attached to a belt, for example, with the snap hook. Product Information: Material: plastic Colour: black Outer Diameter: 15.9 cm Inner Diameter: 14.5 cm Height Outside: 4.8 cm Height Inside: 3.0 cm Weight: 0.230 kg Delivery without wire.
Handles for Unwinding Wire Spools, Set
These handles allow easy unwinding of spools with wire, cord, lines or similar. The handles are applicable to all sorts of spools that have a hole in the core with a diameter of 2.3 - 2.5 cm. Simply insert one handle on the left and the other on the right hole. Suitable for wire spools 002017 and 002111. Product information: - Material: Plastic - Color: Black - Handle Length: 8.5 cm - Total Length: 12.5 cm - Diameter Axle: 2.3 - 2.5 cm - Length Axle: 3 cm - Weight: 83 g Delivery without wire reel
Blasting Wire 4 DDS/K red (Steel), Roll 200 m
According to the requirements of ignition systems, our blasting wires meet very high standards due to the blasting technique and have an approval from the German Federal Institute for Materials Research and Testing (BAM). Product Information 002001: - Approval: BAM - Material: steel, copper - Length: 200 m - Outer diameter: 2.5 mm - Number of wires steel: 3 - Number of wires copper: 1 - Insulation: PVC - Minimum operating temperature: - 5 °C - Color: Red - Resistance of the single conductor per 100 m: 4.5 ohms Product Information 002002: - Approval: BAM - Material: steel, copper - Length: 200 m - Outer diameter: 2.5 mm - Number of wires steel: 3 - Number of wires copper: 1 - Insulation: PVC - Color: Red - Resistance of the single conductor per 100 m: 4.5 ohms
Blasting Wire 4 DDS/K red (Steel)
According to the requirements, our ignition cables meet very high standards and accordingly have an approval from the Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: steel, copper - Outer diameter: 2.5 mm - Number of wires steel: 3 - Number of wires copper: 1 - Insulation: PVC - Color: Red - Resistance of the single conductor per 100 m: 4.5 ohms
Blasting Wire 4 DDK Yellow (Copper), Roll 200 m
According to the requirements of ignition systems, our blasting wires meet very high standards due to the blasting technique and have an approval from the German Federal Institute for Materials Research and Testing (BAM). Product Information 002003: - Approval: BAM - Material: copper - Length: 200 m - Outer diameter: 2.5 mm - Number of wires copper: 4 - Insulation: PVC - Minimum operating temperature: - 5 °C - Color: yellow - Resistance of the single conductor per 100 m: 1.4 ohms Product Information 002005: - Approval: BAM - Material: copper - Length: 200 m - Outer diameter: 2.5 mm - Number of wires copper: 4 - Insulation: PVC - Color: yellow - Resistance of the single conductor per 100 m: 1.7 ohms
Blasting Wire 4 DDK Yellow (Copper)
The single wires are fixed parallel to each other. According to the requirements our blasting wires meet very high demands and have appropriate approval from BAM (German Federal Institute for Materials Research and Testing). Insulation: PVC According to the requirements, our blasting wires meet very high standards and accordingly have an approval from the German Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: copper - Outer diameter: 2.5 mm - Number of wires copper: 4 - Insulation: PVC - Color: yellow - Resistance of the single conductor per 100 m: 1.7 ohms
Extension Wire VS Grey (Steel), Different Versions
The insulation of the steel wire is durable and flexible and is tested by the Federal Institute for Materials Research and Testing (BAM). According to the requirements of ignition systems, our extension wires meet very high standards due to the blasting technique and have an approval from the German Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: steel - Diameter of the Strand: 0.6 mm - Number of Strands: 1 - Outer Diameter: 1.3 mm - Insulation: Polyvinyl chloride (PVC) - Color: Grey - Resistance of the single conductor per 100 m: 40 ohms
Extension Wire VS Grey (Steel)
The insulation of the steel wire is durable and flexible. The wire is tested and approved by the Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: steel - Diameter of the strand: 0.6 mm - Outer Diameter: 1.3 mm - Insulation: Polyvinyl chloride (PVC) - Color: grey - Resistance of the single conductor per 100 m: 40 ohms
Extension Wires VK green (Copper), Different Versions
The insulation of the steel wire is durable and flexible and is tested by the Federal Institute for Materials Research and Testing (BAM). According to the requirements of ignition systems, our extension wires meet very high standards due to the blasting technique and have an approval from the German Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: Copper - Diameter of the Strand: 0.6 mm - Number of Strands: 1 - Outer Diameter: 1.3 mm - Insulation: Polyvinyl chloride (PVC) - Color: Green - Resistance of the Single Conductor per 100 m: 6.7 ohms
Extension Wire VK green (Copper)
The insulation of the steel wire is durable and flexible. The wire is tested and approved by the Federal Institute for Materials Research and Testing (BAM). Product Information: - Approval: BAM - Material: Copper - Diameter of the strand: 0.6 mm - Outer diameter: 1.3 mm - Insulation: Polyvinyl Chloride (PVC) - Color: Green - Resistance of the single conductor per 100 m: 6.7 ohms
Extension Wire ST VVS duplex (Steel)
The extension wire has a durable and flexible insulation and is tested and approved by the Federal Institute for Materials Research and Testing (BAM). The duplex wire allows twice the number of strands to be laid at once. Product Information: - Approval: BAM - Material: Steel - Type of connection: duplex - Diameter of the strand: 0.6 mm - outer diameter: 1.3 mm - Insulation: Polyvinyl chloride (PVC) - Color: Grey - Resistance of the single conductor per 100 m: 40 ohms
Cable Drum with Blasting Wire, mounted
A stable cable drum with a diameter of 30 cm made of sheet steel with an orange polyester resin coating and two insulated connection terminals. The scope of delivery includes a 1 m long connection cable with cable lugs 002125. This version already has 200 m of blasting wire installed. In accordance with the requirements, our blasting wires meet very high standards and have been approved by the Federal Institute for Materials Research and Testing (BAM). Product Information: Type 002020-1 with blasting wire 4 DDS / K red - twisted (steel): Blasting Wire: - Approval: BAM - Material: Steel, Copper - Outside Diameter: 2.5 mm - Number of Steel Wires: 3 - Number of Copper Wires: 1 - Insulation: PVC - Minimum operating temperature: - 5 °C - Color: Red - Resistance of the Single Conductor per 100 m: 4.5 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.080 kg Type 002020-2 with blasting wire 4 DDS / K red - duplex (steel): Blasting Wire: - Approval: BAM - Material: Steel, Copper - Outside Diameter: 2.5 mm - Number of Steel Wires: 3 - Number of Copper Wires: 1 - Insulation: PVC - Color: Red - Resistance of the Single Conductor per 100 m: 4.5 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.320 kg Type 002020-3 with blasting wire 4 DDK yellow - twisted (copper): Blasting Wire: - Approval: BAM - Material: Copper - Outside Diameter: 2.5 mm - Number of Copper Wires: 4 - Insulation: PVC - Minimum operating temperature: - 5 °C - Color: Yellow - Resistance of the Single Conductor per 100 m: 1.4 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.340 kg Type 002020-5 with blasting wire 4 DDK yellow - duplex (copper): Blasting Wire: - Approval: BAM - Material: Copper - Outside Diameter: 2.5 mm - Number of Copper Wires: 4 - Insulation: PVC - Color: Yellow - Resistance of the Single Conductor per 100 m: 1.7 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.500 kg
Cable Drum with Blasting Wire, mounted
A stable cable drum with a diameter of 30 cm made of sheet steel with an orange polyester resin coating and two insulated connection terminals. The scope of delivery includes a 1 m long connection cable with cable lugs 002125. This version already has 200 m of blasting wire installed. In accordance with the requirements, our blasting wires meet very high standards and have been approved by the Federal Institute for Materials Research and Testing (BAM). Product Information: Type 002020-1 with blasting wire 4 DDS / K red - twisted (steel): Blasting Wire: - Approval: BAM - Material: Steel, Copper - Outside Diameter: 2.5 mm - Number of Steel Wires: 3 - Number of Copper Wires: 1 - Insulation: PVC - Color: Red - Resistance of the Single Conductor per 100 m: 5 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.080 kg Type 002020-2 with blasting wire 4 DDS / K red - duplex (steel): Blasting Wire: - Approval: BAM - Material: Steel, Copper - Outside Diameter: 2.5 mm - Number of Steel Wires: 3 - Number of Copper Wires: 1 - Insulation: PVC - Color: Red - Resistance of the Single Conductor per 100 m: 5 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.320 kg Type 002020-3 with blasting wire 4 DDK yellow - twisted (copper): Blasting Wire: - Approval: BAM - Material: Copper - Outside Diameter: 2.5 mm - Number of Copper Wires: 4 - Insulation: PVC - Color: Yellow - Resistance of the Single Conductor per 100 m: 1.8 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.340 kg Type 002020-5 with blasting wire 4 DDK yellow - duplex (copper): Blasting Wire: - Approval: BAM - Material: Copper - Outside Diameter: 2.5 mm - Number of Copper Wires: 4 - Insulation: PVC - Color: Yellow - Resistance of the Single Conductor per 100 m: 1.8 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.500 kg
Cable Drum with Blasting Wire, mounted
A stable cable drum with a diameter of 30 cm made of sheet steel with an orange polyester resin coating and two insulated connection terminals. The scope of delivery includes a 1 m long connection cable with cable lugs 002125. This version already has 200 m of blasting wire installed. In accordance with the requirements, our blasting wires meet very high standards and have been approved by the Federal Institute for Materials Research and Testing (BAM). Product Information: Type 002020-1 with blasting wire 4 DDS / K red - twisted (steel): Blasting Wire: - Approval: BAM - Material: Steel, Copper - Outside Diameter: 2.5 mm - Number of Steel Wires: 3 - Number of Copper Wires: 1 - Insulation: PVC - Color: Red - Resistance of the Single Conductor per 100 m: 5 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.080 kg Type 002020-2 with blasting wire 4 DDS / K red - duplex (steel): Blasting Wire: - Approval: BAM - Material: Steel, Copper - Outside Diameter: 2.5 mm - Number of Steel Wires: 3 - Number of Copper Wires: 1 - Insulation: PVC - Color: Red - Resistance of the Single Conductor per 100 m: 5 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.320 kg Type 002020-3 with blasting wire 4 DDK yellow - twisted (copper): Blasting Wire: - Approval: BAM - Material: Copper - Outside Diameter: 2.5 mm - Number of Copper Wires: 4 - Insulation: PVC - Color: Yellow - Resistance of the Single Conductor per 100 m: 1.8 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.340 kg Type 002020-5 with blasting wire 4 DDK yellow - duplex (copper): Blasting Wire: - Approval: BAM - Material: Copper - Outside Diameter: 2.5 mm - Number of Copper Wires: 4 - Insulation: PVC - Color: Yellow - Resistance of the Single Conductor per 100 m: 1.8 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.500 kg
Cable Drum with Blasting Wire, mounted
A stable cable drum with a diameter of 30 cm made of sheet steel with an orange polyester resin coating and two insulated connection terminals. The scope of delivery includes a 1 m long connection cable with cable lugs 002125. This version already has 200 m of blasting wire installed. In accordance with the requirements, our blasting wires meet very high standards and have been approved by the Federal Institute for Materials Research and Testing (BAM). Product Information: Type 002020-1 with blasting wire 4 DDS / K red - twisted (steel): Blasting Wire: - Approval: BAM - Material: Steel, Copper - Outside Diameter: 2.5 mm - Number of Steel Wires: 3 - Number of Copper Wires: 1 - Insulation: PVC - Color: Red - Resistance of the Single Conductor per 100 m: 5 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.080 kg Type 002020-2 with blasting wire 4 DDS / K red - duplex (steel): Blasting Wire: - Approval: BAM - Material: Steel, Copper - Outside Diameter: 2.5 mm - Number of Steel Wires: 3 - Number of Copper Wires: 1 - Insulation: PVC - Color: Red - Resistance of the Single Conductor per 100 m: 5 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.320 kg Type 002020-3 with blasting wire 4 DDK yellow - twisted (copper): Blasting Wire: - Approval: BAM - Material: Copper - Outside Diameter: 2.5 mm - Number of Copper Wires: 4 - Insulation: PVC - Color: Yellow - Resistance of the Single Conductor per 100 m: 1.8 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.340 kg Type 002020-5 with blasting wire 4 DDK yellow - duplex (copper): Blasting Wire: - Approval: BAM - Material: Copper - Outside Diameter: 2.5 mm - Number of Copper Wires: 4 - Insulation: PVC - Color: Yellow - Resistance of the Single Conductor per 100 m: 1.8 Ohms Cable Reel: - Material: Steel Sheet with Polyester Resin Coating - Weight: 9.500 kg
Connection Wire
A 1 m long blasting wire with cable lugs used to connect the cable drums 002020, 002021 and 002022 to the igniter. Product information 4 DDS / K Steel (002025): - Material: steel, copper - Dimension: 1 m length - Outer diameter: 2.5 mm - Number of wires steel: 3 - Number of wires copper: 1 - Type of connection: stranded - Insulation: PVC - Red color - Resistance of the single conductor per 100 m: 5 ohms - Weight: 0.039 kg Product information 4DDK Copper (002125) - Material: copper - Dimension: 1 m length - Outer diameter: 2.5 mm - Number of wires copper: 4 - Type of connection: stranded - Insulation: PVC - Color yellow - Resistance of the single conductor per 100 m: 1.8 ohms - Weight: 0.038 kg
Connecting Fuse for Detonating Cord 12 g/m
It connects an electrical detonator safety and reliable with the blasting cord. The electrical detonator will always be tight and direct connected with the detonator cord. Errors caused by an unsafe fastening can be deducted. Pull the connecting fuse over the detonation cord and put it up to half into the stemming. Than plug the electronic detonator right next to the detonation cord in the connecting fuse. Advantages: The detonator always remains closely next to the blasting cord in its whole length. The connecting spot won’t fall over so the blasting cord won’t bend due to pushing the fuse in the stemming. The connection can be controlled. No need for wrapping with insulant tape or soft wire which costs time. You can protect the connection spot against falling stones or any other mechanical damages if you put the fuse in the mouth of the bore hole. Product information suitable for Riocord (002050): - Material: Plastic - Colour: green - Dimensions: about 8.5 cm long - Weight per unit: 0.520 kg Product information suitable for Nitrocord (002250): - Material: Plastic - Colour: red - Dimensions: about 8.5 cm long - Weight per unit: 0.640 kg
Connecting Fuse for Detonating Cord 40 g/m
It connects an electrical detonator safety and reliable with the blasting cord. The electrical detonator will always be tight and direct connected with the detonator cord. Errors caused by an unsafe fastening can be deducted. Pull the connecting fuse over the detonation cord and put it up to half into the stemming. Then plug the electronic detonator right next to the detonation cord in the connecting fuse. Advantages: The detonator always remains closely next to the blasting cord in its whole length. The connecting spot won’t fall over so the blasting cord won’t bend due to pushing the fuse in the stemming. The connection can be controlled. No need for wrapping with insulant tape or soft wire which costs time. You can protect the connection spot against falling stones or any other mechanical damages if you put the fuse in the mouth of the bore hole. Product information suitable for Riocord (002052): - Material: Plastic - Color: transparent - Dimensions: about 8.5 cm long - Weight per unit: 0.990 kg Product information suitable for Nitrocord (002252): - Material: Plastic - Color: transparent - Dimensions: about 8.5 cm long - Weight per unit: 0.940 kg