- Item Number: 002750-1
The vibration meter VM-7TS fulfills the requirement of DIN45669 for measurement and vibrations according to DIN4150.
The robust housing of the measuring device and sensor block in bright orange makes the device ideal for use on construction sites and outdoors.
Special waterproof push-pull connectors ensure that the measuring system can be set up quickly and easily.
For data transmission, the device can be connected directly to the PC via USB cable.
Alternatively, the data can be copied on the supplied USB stick.
The software can be installed and used on any number of Windows PCs.
The integrated battery and the energy saving options ensure that the vibration measuring device can measure for several days without a power supply.
The Vibra ZEB VM-7TS can be individually adapted to the respective measurement requirements.
For individual advice, we ask for a rough description of the application.
The extensions and possible uses of the vibration measuring device are listed under the tab Optional Accessories.
- 1 Basic Device
- 1 Sensor Block (x, y, z) with Integrated Spirit Level and 5 m Cable
- USB Stick with PC Software (Windows) and Conditions Manual
- USB Data Transmission Cable
- Power Plug
- Measuring Variable: Velocity of Vibration v (t)
- Channels Standard: 3 (x, y, z)
- Channels Optional: + 3 (x, y, z) additional + 1 Mic for Sound pressure
- Measuring Range: -/+120 mm / s
- ADC Resolution: 16 bit
- Frequency Range: 1-315 Hz
- Power Supply: 12V
- Memory / Events: 1800MB / 10000
- Interfaces: Serial, USB, LAN
- Dimensions: 18 x 22 x 7 cm
- Weight: 2.800 kg
- KBf Module (002798):
According DIN 4150-II or the Norm mentioned in the datasheet. With this software upgrade, the vibration rate is measured with sensor block on channels 1-3 and the KBf values are recorded on channels 4-6.
- Separate Z Axis:
Two sensor blocks, one with channels X and Y, the second with channel Z, for measuring other levels z. B. the attic.
- Module for Virtual Channels (002794):
Is mainly used as a virtual acceleration channel and is used to determine the acceleration from the vibration speed.
With this software upgrade, the vibration speed is measured with sensor block on channel 1-3 and the three sensors are virtually displayed in channel 4-6 in m / s².
- Second Sensor Block (x, y, z) (002785):
An additional sensor block for 6-channel operations.
- Sound pressure microphone probe (002793):
The measuring device can be used in cases to determine noise pollution at the workplace and in traffic.
Another purpose is the determination of vibrations and running noises on technical devices and the investigation of countermeasures for their effectiveness.
- Communication module (002791):
This module with network interface (LAN) includes the use of a web server, FTP server, e-mail services).
The device can be connected to the Internet via an LTE router and send messages to cell phones, tablets and computers via e-mail or SMS.
- LTE Router (002795):
With a SIM card from a telephone provider, the router can connect to the Internet via LTE or 4G network.
- Wi-Fi Adapter (002784):
This item is needed in combination with the communication module if a Wi-Fi network should be used.
- Printer with Printer Module (002732):
The reports can be printed on site using the mobile printer.
- Steel Tips (002788):
For a stable hold of the sensor block on the floor.
- Extension Cable (002799):
An extension cable between 5 and 80 m can be used to increase the distance between the sensor blocks.
- Rugged Bag (002792):
Suitable for transport and storage of the vibration measuring device.
- Hard Case (002796):
Suitable for transporting and storing the vibration measuring device with accessories.
The housing is very robust and in bright orange.
The case also has castors and an extendable handle.